Pricing
Category
Brand
Search code
ALPP2S16
Specifications
Flange
european 4-hole mounting, Ø 36,5 mm
Axle type
conical 1:8 with key
Connection
standard european port
Turning direction
ccw
Displacement
11.5 cm3/rev
Flow at 1500 Rpm
16.4 l/min
Extra
Build type | end pump |
Medium | hydraulic oil |
Viscosity range (Cst) | allowed 6-500 recommended 10-100 start-up |
Temperature range | -10⁰C +80⁰C |
Inlet pressure | 0,7 - 3 bar |
Material front and back | aluminium |
Material housing | aluminium |
Material seal | rubber |
Material gears | special hardened steel |
Flange | european 4-hole mounting, Ø 36,5 mm |
Shaft type | conical 1:8 with key |
Connection | standard european port |
Rotation | ccw |
Displacement | 11.5 cm3/rev |
Pressure continuous | 230 bar |
Max. pressure intermittent | 250 bar |
Max. peak pressure | 270 bar |
Max. revs | 4000 rpm |
Min. revs | 600 rpm |
Shaft diameter | 14.7 mm |
Shaft thread | M12,5 |
Height fitting edge | 5 mm |
Dia. fitting edge | 36.5 mm |
Center inlet - front | 57 mm |
Front - back excl. fitting edge | 110.5 mm |
Thread mounting bolt sunction side | M8 |
Size bolts sunction side | 40 mm |
Thread bolt press side | M8 |
Size bolts press side | 40 mm |
Flow at 1500 Rpm | 16.4 l/min |
bearings | yes |
Volume efficiency | 93% between 1000 - 2000rpm |
Shaft load 2 (Max. torq inner Shaft) | 100 Nm |