Pricing
Category
Brand
Search code
GHM1D16
Specifications
Flange
European 4-hole mounting
Axle type
conical 1:8 with key
Connection
standard European port
Turning direction
cw
Displacement
11 cm3/rev
Flow at 1500 Rpm
15.7 l/min
Extra
Build type | gear motor |
Max. torq shaft | 50±4 Nm |
Medium | hydraulic oil |
Viscosity range (Cst) | allowed 6-500 recommended 10-100 start-up 2001 |
Temperature range | -10⁰C +80⁰C |
Pressure continuous | 190 bar |
Max. pressure intermittent | 200 bar |
Max. peak pressure | 215 bar |
Max. revs | 2200 rpm |
Min. revs | 700 rpm |
Volume efficiency | 95% between 1000 - 2000rpm |
Shaft thread | M10x1 |
Shaft length | 29.5 mm |
Shaft length inc. fitting edge | 35 mm |
Height fitting edge | 5.5 mm |
Dia. fitting edge | 30 mm |
Center inlet - front | 54 mm |
Front - back excl. fitting edge | 107 mm |
Thread mounting bolt sunction side | M6 |
Size bolts sunction side | 30 mm |
Thread bolt press side | M6 |
Size bolts press side | 30 mm |
Dia. mounting hole front | 6.5 mm |
Size mounting holes front | 56x73 mm |
key width | 3 mm |
Material front and back | cast iron |
Material housing | aluminium |
Material seal | NBR |
Material gears | special hardened steel |
Sound level | middle |
Shaft load 1 (Max. torq) | 100 Nm |
Flange | European 4-hole mounting |
Shaft type | conical 1:8 with key |
Connection | standard European port |
Turning direction | cw |
Displacement | 11 cm3/rev |
Flow at 1500 Rpm | 15.7 l/min |